English
Chinese
HYUNDAI 2014 MISTRA camera
- PRODUCT DETAIL
HYUNDAI 2014 MISTRA camera
| Image sensor: | 1/4 PC7070 |
| Effective pixels: | 640*480 |
| Horizontal resolutions: | 480 TV lines |
| Wide-angle: | 170 Degree |
| horizontal angle: | 110 Degree |
| Power consumption: | 130mA |
| Power supply: | DC12V |
| Waterproof rate: | IP67 |
| Night vision Color camera | Yes |
Product Description ：
The first step first remove the car battery power supply at the connection, and the removal of the connection away from the electrode where,
To prevent accidental power supply. The second step to determine the location of the car camera installation, generally divided into two types:
A kind of installed in the license plate license plate position, this installation is relatively easy,
Just use the camera accessories inside the small screws to fix the camera in the position of the license plate can be.
Through the accessories in the iron or the adjustment of the gasket, so that the camera to achieve the best reversing angle.
The camera's line passes through the slot of the license plate and is connected to the reversing lamp power and video extension cable.
This type of installation of the reverse camera is a more popular one, the appearance of more subtle, easy to install.
The other is the installation of drilling, embedded inside the bumper, the benefits of this method is not in the car after the metal pieces of drilling.
Because the bumper is a plastic part, the camera alignment is also relatively easy. The third step will be the camera's power cord and the car after the reversing lamp power cord connection.
And then the video line of the camera is connected with the video extension cable, and the other end of the video extension cable is connected with the AV input of the vehicle display.
Finally, restore the battery power supply, start the car, put on the reverse gear, you can see in the car display reversing images.
Note:
1, can not rely entirely on the rear view system reversing, but can only be regarded as a reversing aids.
1, can not rely entirely on the rear view system reversing, but can only be regarded as a reversing aids.
2, the car display must be properly connected, if the monitor does not provide AV input interface,
You must find the appropriate video cable or install the video switching device so that the rear view image is displayed properly.
3, do not easily car power supply directly connected to the car battery power, so as to avoid power instability
Experience
HYUNDAI 2014 MISTRA camera
| Image sensor: | 1/4 PC7070 |
| Effective pixels: | 640*480 |
| Horizontal resolutions: | 480 TV lines |
| Wide-angle: | 170 Degree |
| horizontal angle: | 110 Degree |
| Power consumption: | 130mA |
| Power supply: | DC12V |
| Waterproof rate: | IP67 |
| Night vision Color camera | Yes |
Product Description ：
The first step first remove the car battery power supply at the connection, and the removal of the connection away from the electrode where,
To prevent accidental power supply. The second step to determine the location of the car camera installation, generally divided into two types:
A kind of installed in the license plate license plate position, this installation is relatively easy,
Just use the camera accessories inside the small screws to fix the camera in the position of the license plate can be.
Through the accessories in the iron or the adjustment of the gasket, so that the camera to achieve the best reversing angle.
The camera's line passes through the slot of the license plate and is connected to the reversing lamp power and video extension cable.
This type of installation of the reverse camera is a more popular one, the appearance of more subtle, easy to install.
The other is the installation of drilling, embedded inside the bumper, the benefits of this method is not in the car after the metal pieces of drilling.
Because the bumper is a plastic part, the camera alignment is also relatively easy. The third step will be the camera's power cord and the car after the reversing lamp power cord connection.
And then the video line of the camera is connected with the video extension cable, and the other end of the video extension cable is connected with the AV input of the vehicle display.
Finally, restore the battery power supply, start the car, put on the reverse gear, you can see in the car display reversing images.
Note:
1, can not rely entirely on the rear view system reversing, but can only be regarded as a reversing aids.
1, can not rely entirely on the rear view system reversing, but can only be regarded as a reversing aids.
2, the car display must be properly connected, if the monitor does not provide AV input interface,
You must find the appropriate video cable or install the video switching device so that the rear view image is displayed properly.
3, do not easily car power supply directly connected to the car battery power, so as to avoid power instability
