360 AVW system/Car HD camera/TFT screen/Car DVD supplier

+86-020-29873476 Info@carsanbo.com

Guangzhou Carsanbo Technology Limited

18.5mm hanging car camera/7070 chip

18.5mm hanging car camera/7070 chip

  • Model No.:CAM210B
  • Image sensor: PC 7070
  • TV system: PAL/NTSC optional
  • Effective pixels: 640*480
  • Horizontal resolutions: 480 TV lines
  • Wide-angle: 170 Degree ,horizontal angle:110 Degree
  • Sensing area: 3.8 mm *2.9 mm
  • Video output: RCA connector ,Other connector optional,
  • Waterproof rate:IP67
  • Night vision Color camera
SEND INQUIRY

You can make an inquiry about this product.
Your e-mail will not be leaked.

  • PRODUCT DETAIL

18.5mm hanging car camera/7070 chip

Product Specification :

Image sensor:   PC  7070
TV system:  PAL/NTSC optional
Effective pixels:  640*480
 Horizontal resolutions:  480 TV lines 
Angle  Wide-angle: 170 Degree ,horizontal angle:110 Degree   
 Sensing area:  3.8 mm *2.9 mm
Video output:  RCA connector ,Other connector optional, 
 Waterproof rate: IP67
Night vision Color camera Yes

 

Product Description :

Can be very real-time rendering of video and audio for our traffic accident handling and positioning to provide a more scientific basis for our property and life safety has been fully protected .

The camera power is connected to the reverse taillight. When the reverse gear is loaded, the camera is brought into power supply at the same time, and the collected video information is sent to the wireless receiver at the front of the car through the wireless transmitter. The receiver transmits the video information through AV IN interface to the GPS navigator, so that when the receiver receives the signal, regardless of Gps navigator in any kind of user interface, will give priority to the LCD screen for reversing video video.
Car camera and car display and car DVD navigation device portable GPS navigator when using the difference, and the use of car monitors, car display does not need to boot as long as the reverse of the car mounted car display will automatically display car camera images; and car DVD navigation is The general boot case to display the car camera image; and portable GPS navigator is used in the case of the navigation device in order to display the car camera image.

Easy Installation:

1. Mount the camera to your car's license plate area, back window, or any other suitable place
2. Adjust the lens of the camera to its best position.
3. Connect power wire (red and black) to your vehicle DC 12V power system.
 
4. Connect the video output (yellow wire) of the camera to the display in your vehicle.

Experience

18.5mm hanging car camera/7070 chip

Product Specification :

Image sensor:   PC  7070
TV system:  PAL/NTSC optional
Effective pixels:  640*480
 Horizontal resolutions:  480 TV lines 
Angle  Wide-angle: 170 Degree ,horizontal angle:110 Degree   
 Sensing area:  3.8 mm *2.9 mm
Video output:  RCA connector ,Other connector optional, 
 Waterproof rate: IP67
Night vision Color camera Yes

 

Product Description :

Can be very real-time rendering of video and audio for our traffic accident handling and positioning to provide a more scientific basis for our property and life safety has been fully protected .

The camera power is connected to the reverse taillight. When the reverse gear is loaded, the camera is brought into power supply at the same time, and the collected video information is sent to the wireless receiver at the front of the car through the wireless transmitter. The receiver transmits the video information through AV IN interface to the GPS navigator, so that when the receiver receives the signal, regardless of Gps navigator in any kind of user interface, will give priority to the LCD screen for reversing video video.
Car camera and car display and car DVD navigation device portable GPS navigator when using the difference, and the use of car monitors, car display does not need to boot as long as the reverse of the car mounted car display will automatically display car camera images; and car DVD navigation is The general boot case to display the car camera image; and portable GPS navigator is used in the case of the navigation device in order to display the car camera image.

Easy Installation:

1. Mount the camera to your car's license plate area, back window, or any other suitable place
2. Adjust the lens of the camera to its best position.
3. Connect power wire (red and black) to your vehicle DC 12V power system.
 
4. Connect the video output (yellow wire) of the camera to the display in your vehicle.